Measuring Instruments

Approx. 116 / Piece Get Latest Price

Features

1. Auto lock
2. Soft grip bi-material case
3. Dura coat tape blade with 4x longer life
4. Belt clip

Approx. 78 / Piece Get Latest Price

Features
1. Press & release side lock2. Back lock3. Unbreakable case4. Available With and Without Belt Clip
5. True Zero moveable hook

Approx. 200 / Piece Get Latest Price

Features

- Unbreakable ABS case
- Heat sealed markings on the tape blade for longer life
- Durable winding mechanism
- Case reinforced with stainless steel band
- Stainless steel mouth

Approx. 40 / Piece Get Latest Price

Features

- Unbreakable ABS Case- Belt clip- Compact size

Type: Hard Tape Body Material: ABS Length: 3 Metric Blade Material: Steel Color: Multicolor

Approx. 100 / Piece Get Latest Price

Features
1. Press & release side lock2. Unbreakable ABS case3. Belt Clip4. Spirit Level
5. True zero moveable hook

Approx. 46 / Piece Get Latest Price

Features
1. Unbreakable ABS case
2. End Hook with Three rivets
3. True zero moveable hook
4. Sturdy belt clip
5. Rubber hand strap

Approx. 80 / Piece Get Latest Price

Features 

1. Die cast zinc case2. Chrome plated case3. Compact size
4. Grooved case sides prevent slip
5. Power coated
6. True zero moveable hook

Approx. 200 / Piece Get Latest Price

Features

• Click action top lock
• Unbreakable ABS case with rubber grip
• Belt clip

Approx. 45 / Piece Get Latest Price

Freemans Truflex 2 mtr Steel Tape

Nickle plated sheet metal case
Compact Size
True Zero movable hook

Approx. 482 / Piece Get Latest Price

Features 

1. Case reinforced with stainless steel band
2. Heavy duty Vinyl leatherette covered case
3. Durable winding mechanism
4. Stainless steel mouth
5. 9.5 MM or 13 MM wide tape blades
6. Dura coat tape blades with 4X longer life

Approx. 100 / Piece Get Latest Price

Features
- Unbreakable ABS case- Heat sealed markings on the tape blade for longer life- Durable winding mechanism- Steel end hook

Approx. 100 / Piece Get Latest Price

1. CLICK-ACTION FRONT LOCK button can be used to hold the tape blade in place when extended, facilitating easier measurements over longer distances.

2. PAUSE button allows the user to temporarily hold the tape blade in place when extended, facilitating quicker and easier measurements over longer distances.

SOFT GRIP BI-MATERIAL CASE:

1. Unbreakable ABS case stands up to the toughest jobsite demands. 2. Case overmoulded with non-slip rubber for a better and more comfortable grip.

DURA-COAT TAPE BLADE: 1. The tape blade is coated with our Dura Coat Technology, making it highly resistant to abrasion and repeated use, with a 4X longer life 2. The tape blade has a matt Glare-Free finish, making it easier to read measurements in bright outdoor conditions.

BELT-CLIP AND HAND STRAP: Equipped with a Belt Clip and Hand Strap for easy storage and portability in and around the jobsite.Manufactured to Class II Accuracy, with the highest quality raw materials and components. PROUDLY MADE IN INDIA.

Approx. 154 / Piece Get Latest Price

Stanley-short tape rule has a flexible tape to measure short distances. the measuring tape is covered with metal coating. it can be easily carried in toolkit and pockets as well

Approx. 40 / Piece Get Latest Price

Features

- Unbreakable ABS case- Compact size
- True zero moveable hook

Approx. 200 / Piece Get Latest Price

Features

- Vinyl leatherette covered ABS case 
- Heat sealed markings on tape blade for longer life
- Durable winding mechanism
- Case reinforced with stainless steel band
- Stainless steel mouth
- 13mm width tape ribbon

Approx. 1,800 / Piece Get Latest Price

Features

- Unbreakable ABS case
- Dura coat tape blade with 4x longer life
- Long and durable winding handle for easy retraction
- Protruding marker

Approx. 1,067 / Piece Get Latest Price

Features

- Unbreakable ABS case
- Heat sealed markings on the tape blade for longer life
- Long and durable winding handle for easy retraction
- Protruding marker
- Soft grip PVC handle

Approx. 36 / Piece Get Latest Price

Product Brochure
FRONT SIDE: Top edge 1/2 mm, mm.Bottom edge 1/16ths, 1/32nds, 1/64ths.REVERSE SIDE: Conversion Table inches to MM.

Kristeel SS Rulers, available in a range of sizes including 6, 12, 24, 39, and 48 inches, are precision measuring tools designed for accuracy and durability. These rulers are crafted from high-quality stainless steel, ensuring resistance to corrosion and wear. They feature clear and precise measurement markings in both metric and imperial units, making them versatile for a wide range of applications, from engineering and drafting to woodworking and general measurement tasks. With various lengths to choose from, Kristeel SS Rulers provide reliable and accurate measurements for professionals and hobbyists alike, enhancing precision and efficiency in their work.

Approx. 340 / Piece Get Latest Price

Product Brochure
For Machinists, Draughtsmen, layout men & other mechanics. Protractor has easy etched reading graduations from 0o to 180o on opposite directions.The protractor also includes depth gauge scale for measuring the depth- ELEGANT DESIGN- ACCURATE GRADUATION- POLISHED FINISH

Approx. 433 / Piece Get Latest Price

Product Brochure
To check and determine the screws pitches for ISO Metric threads and With worth 55 degree and United Nations threads unf/unc 60°.

- This product is completely manufactured in stainless steel material. - Narrow leaf design allows checking both external and internal threads even in small holes not accessible with wide leaf type gauges.- No. of leaves :- 52

Approx. 988 / Piece Get Latest Price

Product Brochure
A tool for the use of welding operator. The tool can be used with ease for weld joint preparatory functions as well as for checking of the weld joint. The tool combines a bore gauge, angle gauge, depth gauge & weld height gauge. The tool is made in stainless steel with polish finish.

Approx. 306 / Piece Get Latest Price

Product Brochure
Made of Steel. Graduations in both British & Metric System

Rectangular wire gauge is a measuring tool used to determine the thickness or diameter of stainless steel wires. Unlike traditional round wire gauges, the SS rectangular wire gauge is specifically designed for measuring flat or rectangular cross-section wires. It typically features a series of notches or slots, each labeled with a corresponding wire thickness or diameter. Users can slide the wire into the appropriate notch until it matches the wire's size, allowing for quick and accurate wire diameter measurement. These gauges are commonly used in various industries, including manufacturing and metallurgy, where precise wire thickness or diameter information is essential for quality control and production processes.

Approx. 2,011 / Piece Get Latest Price

Product Brochure
This rugged gauge is fabricated in stainless steel used to measure the important Dimensions of weld preparations & of completed Butt and fillet welds. It is intended for general fabrication work in the shop or on-site. It rapidly measures Angle preparation (0 to 60 Degrees), Excess weld metal, Fillet weld leg length, Throat length, Misalignment & hole sizes for butt weld, butt-weld reinforcement, General Linear Measurement upto 60mm or 2 inches- Scales are graduated in metric units & supplied in a preventive case with instruction leaflet.

Approx. 2,900 / Piece Get Latest Price

Product Brochure
A Mitutoyo dual-scale vernier caliper equipped with a fine-adjustment wheel and standard outside and inside jaws. Hardened stainless steel construction with easy-to-read, satin-chromed scales.

Approx. 1,850 / Piece Get Latest Price

Product Brochure
Standard Type, 10 mm Range, 0,01 mm Graduation

This is a standard dial indicator. It offers you the following benefits:

• Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed and removed without tools.
• No through screw holes on the frame as well as the use of an O-ring prevents water or oil penetration.

Approx. 2,000 / Piece Get Latest Price

Product Brochure
A Mitutoyo basic, cost effective, non-digital micrometer with a ratchet stop to guarantee repeatable measurement.

Approx. 7,500 / Piece Get Latest Price

Product Brochure
A Mitutoyo digital caliper equipped with standard outside and inside jaws. Hardened stainless steel construction and equipped with the latest electromagnetic ABSOLUTE AOS System scale for error free, high-speed measurement.

Approx. 210 / Piece Get Latest Price

Features

1. 180⁰, 90⁰, 45⁰ high visibility block vials
2. Heavy duty aluminium profile
3. Shock absorbent end caps
4. Magnetic base
5. High Accuracy: 0.029⁰, 0.5mm/m

Approx. 2,300 / Piece Get Latest Price

Aluminium wheel with external rubber coating. exterior usage for rough surface like roads, grounds etc.

Features & Benefits

• 12” Aluminium wheel counts up to 10000 feet(1000m) with convenient push-button reset
• 2-section snap-lock handle with ergonomic handle
• Built-in Kickstand

Approx. 400 / Piece Get Latest Price

 Features & Benefits

• Ø  Rugged Rubber case- Impact resistant and provides Anti-Slip Hold
• Ø  200 cm stand out for optimized one person control
• Ø  Double-End big hook for versatile grips and measure
• Ø  Tylon Coated blade which is long lasting and easier to read
• Ø  Certified MID II accuracy
• Ø  Package Contents: 1-Tylon Tape.Size 3/5 mtr

Approx. 233 / Piece Get Latest Price

Product Brochure
- For the measuring of cylindrical bores.- Reading : 0.1 mm- Flat and not hardened

Approx. 559 / Piece Get Latest Price

Product Brochure
Kristeel 3 feeler gauge- 27 blades. This gauge is used to check flatness and gap between mating parts. Range : 0. 001 to 0. 025 (english/metric model) (27 blades). Blade length - 3. . This is made from good quality material. Care instruction keep away from the items or products which may cause damage to this product.

Approx. 380 / Piece Get Latest Price

Product Brochure
For Machinists, Draughtsmen, layout men & other mechanics. Protractor has easy etched reading graduations from 0o to 180o on opposite directions.The protractor also includes depth gauge scale for measuring the depth- ELEGANT DESIGN- ACCURATE GRADUATION- POLISHED FINISH

Approx. 1,901 / Piece Get Latest Price

Product Brochure
Insize Vernier Calliper

• Meet DIN 862
• Made of Stainless Steel
• Satin Chrome plated reading surface

Approx. 450 / Piece Get Latest Price

A magnetic plumb bob is a compact and versatile tool used in construction and carpentry. It features a magnetized weight at one end of a string or line, which helps it align vertically with the Earth's gravitational pull. This makes it ideal for establishing accurate vertical reference points, such as ensuring walls, frames, or structures are perfectly plumb. Magnetic plum bobs simplify tasks requiring precise alignment and are a valuable tool in a builder's kit.

Approx. 200 / Piece Get Latest Price

Freemans Magnetic Torpedo Level

- Sturdy Plastic Body With Taper Ends, Slides Easily Into Pocket
- High Quality Plastic Made ABS
- Magnetic Base For Convenience Of Use On Steel Structures
- High Visibility 180º, 90º And 45º Degree Vials

Approx. 253 / Piece Get Latest Price

Product Brochure
Made of Steel. Graduations in both British & Metric System

A round wire gauge is a precision measuring tool used to determine the diameter or thickness of round wires or cylindrical objects. It typically consists of a series of circular notches or holes, each labeled with a specific wire diameter or thickness measurement. To measure a wire's diameter, you insert the wire into the notch that corresponds to its size until it fits snugly. This allows for quick and accurate measurement of wire thickness or diameter, which is crucial in various applications, including electrical work, jewelry making, and manufacturing, where precise wire sizing is essential for proper functionality and quality control.

Approx. 200 / Piece Get Latest Price

Product Brochure
A handy Metric or English convertible depth gauge. The set consist of one head and two stainless steel rulers; one metric, the other English. Either one can be easily slipped and locked in to the slot. The rules can be used separately, If desired. Metric graduation in 1/2 millimeters; English in 64ths. Each set individually packed in PVC covers.

Approx. 386 / Piece Get Latest Price

Product Brochure
For Machinists, Draughtsmen, layout men & other mechanics. Protractor has easy etched reading graduations from 0o to 180o on opposite directions.The protractor also includes depth gauge scale for measuring the depth- ELEGANT DESIGN- ACCURATE GRADUATION- POLISHED FINISH

Approx. 1,392 / Piece Get Latest Price

Product Brochure
This rugged gauge fabricated in stainless steel, will measure the important dimensions of weld preparations & of completed butt and fillet welds. It is intended for general fabrication work in the shop or on-site and rapidly measures weld features like tolerance of convexity, tolerance of reinforcement, concavity and underfil, to determine size of fillet weld. The scales are graduated in metric units, It is packed in a protective case & an instruction leaflet is provided.

The Kristeel Welding Gauge Automatic AUWG is a specialized measuring tool designed for weld quality inspection and assessment. This gauge is equipped with automatic retractable pins that make it particularly useful for checking various welding parameters, including weld fillet leg length, throat thickness, and root penetration. It helps welders and quality control inspectors ensure that welds meet specified standards and codes by providing accurate and consistent measurements. The Kristeel Welding Gauge Automatic AUWG is a valuable instrument in the field of welding and fabrication, helping maintain welding quality and structural integrity in various applications.